Alright, let’s talk about this here Sentro knitting machine. Ya know, the one that’s supposed to make knittin’ easy? Well, sometimes it ain’t so easy when it starts clickin’ and clackin’ like a bunch of chickens in a coop.
First off, if your Sentro is makin’ a racket, like a real loud clickin’ sound, it might be because somethin’ ain’t greased up right. Now, I ain’t no fancy engineer, but I heard you gotta use that white lithium grease. Don’t go puttin’ any of that WD40 stuff on it, ya hear? That stuff’s for rusty hinges, not your knittin’ machine. It’ll mess up the plastic, sure as rain makes mud.
Sometimes, the needles get stuck. You know, those little metal things that go up and down? If they ain’t movin’ smooth, they’ll make a clickin’ sound. What I do is take out the yarn, and then I slowly crank that handle. If it jams up, I take a look to see if the needles are hittin’ somethin’ they shouldn’t. There’s this thing called a sinker plate, and sometimes them needles try to go over it instead of under it. If that plate is bent, well, you gotta bend it back. Careful now, don’t break it!
Another thing, that counter, the little thing that’s supposed to tell you how many rows you’ve done? Sometimes it goes wonky. Especially when it hits that white peg. I’ve seen it happen more than once. If yours is clickin’ and the counter ain’t workin’ right, it could be related. Maybe somethin’s loose, maybe somethin’s stuck. You gotta take a look, see if anythin’s outta place. And if the handle won’t turn at all, just makes a clickin’ noise, well, that’s a whole heap of trouble.
- Check the needles: Make sure they ain’t bent or broken.
- Grease it up: Use that white lithium grease, remember?
- Look at the sinker plate: Make sure it ain’t bent outta shape.
- The counter: If it’s clickin’ and not countin’, somethin’s up with that white peg.
I seen some folks sayin’ there’s special oils for these fancy knittin’ machines, somethin’ called TIXO, but honestly, I just stick with the white grease. Seems to do the trick. And if your machine is hard to spin and droppin’ stitches after just a few rows, well, that clickin’ noise is probably tellin’ you somethin’s wrong with how them needles are movin’. They need to be oiled and movin’ freely like well-greased wagon wheels, not clickin’ and stickin’ like a rusty gate.
Now, I ain’t sayin’ I’m an expert, but I’ve been around long enough to know a thing or two about fixin’ things. And this Sentro machine, well, it’s just a machine. It ain’t magic. If it’s clickin’, it’s cryin’ out for help. You just gotta listen and figure out what’s botherin’ it. And if you can’t figure it out, well, maybe find someone who knows a little more about these things. Or watch some of them online videos. I hear tell they got videos for just about everything these days, even fixin’ clickin’ knittin’ machines.
Fixing the gear, they say, is easy. I ain’t tried it myself, but I reckon if a fella can show it on them videos, it can’t be too hard. Just remember, be patient, take your time, and don’t force nothin’. That’s how you break things, not fix ‘em. And if all else fails, well, maybe it’s time for a new Sentro. But try the easy stuff first, ya hear? A little grease and a little fiddlin’ can go a long way. And keep them needles happy, that’s the main thing. A happy needle don’t click, it just knits.
So there you have it, just some plain talk about that clickin’ Sentro. Hope it helps ya get back to knittin’ without all that racket. Remember, a quiet machine is a happy machine, and a happy machine makes pretty things.
Tags: [Sentro knitting machine, knitting machine noise, clicking noise, knitting machine repair, white lithium grease, sinker plate, stuck needles, handle won’t turn, knitting machine counter, TIXO lubricant, fix knitting machine, Sentro 48]
