You know, hemming them knitted fabrics, it ain’t no big deal if you just use a regular sewing machine. Now, I ain’t no fancy expert, but I done it enough times to tell ya what works. First thing, you gotta get the right tools. Don’t worry, no need for any of them fancy machines like them sergers. A good ol’ regular sewing machine works just fine if you know what you’re doing.
Now, let me tell ya, them knits, they stretch, right? So, you don’t wanna use just any needle. What you need is a ballpoint needle or maybe a stretch needle. Why? Well, them sharp needles are gonna poke holes in the fabric and make it look all messy. But them ballpoint ones, they kinda slip between the fibers nice and easy. If you can’t find one, don’t worry too much. Just make sure you ain’t using no super sharp one.
Step-by-step for hemming knits:
- Step 1: First, fold up your hem. Now, how much you fold is up to you, but a good inch is usually enough. Pin it down so it don’t go wandering off when you’re sewing.
- Step 2: Now, set your machine to either a narrow zigzag stitch or a stretch stitch. Both work fine, but the zigzag one is my go-to. Them stretch stitches are made for these stretchy fabrics, so either way, you’re in good hands.
- Step 3: Start sewing. But go slow, alright? If you’re working with lightweight knits, you might wanna use a twin needle to make it look all professional. This gives it that double stitch line, you know? Makes it look like it came from the store.
- Step 4: Keep a steady hand, and don’t pull too much. If you pull, the fabric’s gonna stretch, and that hem is gonna look all wavy-like. Let the machine do the work.
Sometimes, you might notice the fabric kind of waving or stretching. That’s normal if you ain’t careful. What you can do is adjust the pressure on your presser foot. Not every machine has this option, but if yours does, loosen it a little. If it don’t, just be extra careful not to stretch the fabric while sewing.
Another trick? You can use some overlock stitches, if your machine has ’em, to finish the edge. Them overlock stitches wrap right around the edge of your fabric and stop it from fraying or getting all wavy. But, if your machine don’t got them, don’t sweat it. You can still get a nice finish without ’em.
So, let’s recap. A regular sewing machine works just fine for hemming knits, as long as you got the right needle and stitch. Ballpoint or stretch needle? Check. Zigzag or stretch stitch? Check. Twin needle for that fancy look? Yep, that’s a good one too. And always remember, don’t pull on the fabric too hard, or you’ll end up with a mess.
What to remember:
- Ballpoint or stretch needle – don’t use a sharp one!
- Set your machine to a stretch stitch or narrow zigzag.
- If using lightweight knits, a twin needle can make your hem look extra fancy.
- Adjust presser foot pressure if needed, but don’t stress if your machine can’t.
- Slow and steady – let the machine do the work without pulling the fabric.
- Overlock stitches are great, but not necessary.
That’s it! You don’t need no expensive machine or special tools to hem them knitted fabrics. Just follow these simple steps, and your clothes’ll look as good as new. Ain’t nothing too complicated about it.
Tags：[Hemming Knit Fabrics, Regular Sewing Machine, Ballpoint Needle, Twin Needle, Stretch Stitch]
